Training: Technical Introduction to BMS
Thursday 1 August 2019
31 Queen Street, Melbourne
9am to 4pm
Morning tea, coffee and lunch is provided
$490 per person, excluding GST
Please contact me to book your spot
This course is not suitable for experienced BMS engineers, the course was specifically developed for:
BMS new starters
People transitioning into the BMS industry (e.g. electricians and refrigeration technicians)
Hands-on facility managers
Although the course is an introduction, it’s a technical introduction and gets pretty full-on at times, we are going to walk through the entire BMS from top to bottom.
From the sensor, connected to a cable, into the controller, the software, up the sub-network, through the network controller, into the Ethernet network and displayed as graphics, alarms and trends. We are going to piece together the whole thing in one session, so have an early night.
This is not a design, project management or risk mitigation session; its the basics. For example, when we discuss networks, we will run through the different components. Network switches (later 2 & 3), gateways, routers, network controllers, fibre optics, Cat6A and RS485 etc., but we are not going to discuss how to design an Ethernet network or the sub-networks.
Server and Workstation
Graphics, alarms and trends
Ethernet network and sub-networks
Network controllers and gateways
Controller software programs (block and plain English)
Control strategies (overview)
PID Control loops
Types of inputs (sensors)
Types of outputs (actuators)
Field controller power supplies
High Level Interfaces
Energy management systems
What is an open system?
Please contact me to book training dates for your team
See more on the HOME page.